Luminous shine 2420 solar conversion kit 20 amps, 12V / 24 volt charge controller

with 12 Months Warranty
#1 Best Seller
in Luminous
Save 17%
Rs. 2,995
Rs. 2,500

Check COD Availability (upto Rs. 5,000)

Product Summary

Luminous shine 2420 is an upgraded version of solar charge controller which converts conventional inverter into hybrid solar system. i.e. if you already have inverter and battery, By adding suitable solar panel and shine 2420 retrofit, your existing ups / inverter will be converted into solar hybrid inverter. It works with single battery (12V) and double battery (24V) Inverter system.

 

The first priority of shine 2420 is to charge battery, in case of extra power generation, it will run home appliances such as fans, lights directly from solar panel. 

Descriptions

Model Name

Shine 2420

System rating

20 Amp @ 12 Volt, 24 V

Charging current (max)

20 Amp

Panel Support

single battery - 540 watt

double battery - 700 Watts

Technolgy

pwm

Wire Size (max)

4 square mm


 

Features 

  • solar optimization technique
  • digital lcd display 
  • inbuilt reverse polarity & reverse current protection

Technical

  • battery type selection switch
  • four operational modes: auto/manual/charger/100% solar
  • inbuilt protections for short circuit, over voltage and deep discharge 

Lcd display

  • battery voltage – charge level of battery
  • load % - power consumption as a % of total inverter power
  • output voltage
  • pv voltage – solar panel generating voltage
  • pv current – solar panel generating power in amps
  • grid voltage – utility grid voltage level
  • grid charging current – amp with which battery is being charged
  • electricity saved - kwh

QUESTIONS & ANSWERS

Ask a Question
  • How to connect 12 v 320 watt solar panel with existing inverter & battery

    If you have bought solar panel but do not know how to connect them, first, you should read product manual/ warranty card. in case you have two panels of 320 watts and want to connect with inverter, add all panels in Parellel connections, + with + and - with -. ,so that you get maximum current for battery charging. 

  • Can we add 160 watt pv module in normal inverter set up without any charge controller my battery is 150 ah

    You connect solar panels directly with normal battery of 150 Ah. But keep in mind, you should not connect more than 300 watts of panel directly with battery. 

  • With this luminous retrofit(pwm) I have connected 2 12v 150watt pannels, 220ah battery and 900va inverter (as hybrid). Because there a lot of power cut in the area so can I connect sukam MPPT charge controller as in parallel with this luminous retrofit (pwm)? or it will create any problem if there is power avl at the time. pls guide.

    Mppt charge controller is used for getting higher efficiency, Since, There is too much power cut in your area, The first priority is to charge battery from solar panel. To charge 220 Ah battery, first you need 600 watts of solar panel. Secondly, Use Mppt solar charge controller for higher efficiency. There is no need to connect two charge controllers (Pwm and MPPT) both. 

  • Which is better Sukam solarcon or Luminous Retrofit and what is the difference between Sukam Solarcon and Luminous Retrofit?

    Sukam Solar con is better product compared to Luminous Shine 2420 retrofit. check out loom solar Unboxing video to see comparison. 

  • Is it mppt type or pwm type?

    This is an PWM based charge controller.

Customer Reviews

Based on 1 review Write a review

You recently viewed

Clear recently viewed