Solar Panel in Talegaon Dhamdhere, सौर पॅनेल, तळेगाव धमदहेरे- Maharashtra

On-Grid Solar System

An on-grid solar system is a type of solar system that is used to reduce electricity bills. The grid connection is very good; that’s why there is no problem with a power cut here. So, we would like to recommend installing a grid-connected solar system. The on-grid solar system can be installed in rural and agricultural areas in Maharashtra, and the solar solution is best for windy areas.

In Maharashtra, a grid solar system is installed due to the availability of electricity for 24 hours. But there are also some hilly areas in the state. The latest technology in solar systems is best for these areas. Wind power is also available in the hilly or agricultural areas of Maharashtra.

We recommend to you the latest technology of the on-grid solar system, which is the Shark bifacial solar system. A bifacial solar panel will work in every condition, such as no sunlight and cloudy weather. The solar system is very good for hilly areas due to the high winds in these areas. The solar panel stand should be of good quality so that it can stop the solar panel in one place due to the high pressure of the winds. Let us discuss the components of a solar system below.

There are four components that are used in an on-grid solar system.

1. Solar Panel: A solar panel should be of the latest technology, which occupies less space and generates the maximum amount of electricity. Loom Solar is an Indian solar panel manufacturing company that provides Topcon solar panels, which are of the latest technology, which are SHARK 575-700W in 24V and SHARK 450W-550W.
2. Solar Inverter: A solar inverter should be a string or microinverter.
   
3. Balance of System: The balancing of the system consists of a panel stand, DCDB, ACDB, lighting arc, DC wire, and earthing kit.
   
4. Net Metre: After submission of the installation report, the electricity board will install the Net Metre within 30 days.

Solar Water Pump

As I have discussed above, Maharashtra has a lot of potential for agriculture, but there are also hilly areas. Cotton and bananas are cultivated the most here. The water level is used in a smaller amount here. The water level for the cultivation of cotton and bananas is lower.

A solar water pump is installed in agricultural areas where the cultivation of crops is done. The agricultural areas have no source of electricity nearby. So, it is not easy to get the water from nearby a 1-2 km farm. The solar water pump is used to supply water to the area of cultivation.

The components that are used in a solar water pump are:

• Solar panel of SHARK 440W in half-cut technology
• The panel stands for balancing the system.
• VFD
• Motor
• Wires

The solar water pump provides neat and clean water that can be used for drinking and other purposes. It supplies groundwater to the cultivated areas. When there is low sunlight, it will also work. When there is sunlight, the pressure of the water will increase.

Off-Grid Solar System

Off-grid solar systems can also be installed in agricultural areas. There is no supply of electricity nearby. It can be installed in poultry farming. In poultry farming, there is a requirement for LED lights, fans, and auto-feeder machines. There is no power grid supply in hilly areas. Getting individual electricity is difficult. It can also be installed on tin and cemented shade. The remote areas of Maharashtra do not have a supply of electricity nearby.

We recommend an off-grid solar system with the latest technology, which is the SHARK 440 mono-perk, 144-cell half-cut solar panel. The mono-perk solar system has the efficiency of generating electricity even if the shadow comes on the solar panel. The generation of electricity is more complex and depends on the requirements as well. There will be no harm to the solar panels if they are installed on the tin or cemented shade.

Solar Loan

A solar loan is available for the installation of the solar system, which is given by the banks for the installation of the solar system. You need to contact a solar company like Loom Solar or our deal distributors in your city. Our partners will help you with the documentation and the process of the solar loan. In this case, the approval of the bank is needed. After this, the solar system will be installed within 30 days.

Solar Solution for the Group Housing Society

If you want to install a solar system in a group housing society, I am going to tell you about the best solar system as per your requirements.

On-Grid Solar System

The on-grid solar system is installed in group housing societies. Individual homeowners in societies cannot install the solar system, but society associates or society boards can install it. The sanctioned load of a group housing society is 50 kW. We recommend a SHARK 550w solar panel with Topcon technology. A solar system can save 80% on electricity bills. The generation of a solar panel is 4-5 units per day.

It takes less space and gives maximum generation. This will also work in low-light and cloudy weather conditions with more generation. As discussed above, the solar system is balanced and of good quality because the area has high wind pressure. The net metering is applied to the government. The duration of this process can be 1 to 1.5 months. After that, net metering will be installed.

The documentation can be done by yourself or with the help of the installer. If the documentation is done by the installer, the process will be completed in less time. The loan or EMI is available from the local bank, such as the national bank or another.

What are the steps to apply for a solar rooftop?

Here are some guidelines to apply for solar rooftops.

1. Go to the “national portal for rooftop solar."
2. Select your state.
3. Select the electricity board or distribution company in your city or state.
4. Enter the electricity bill customer number.
5. Enter your mobile number.
6. Enter your email ID.
7. Mark the checkbox list.

Frequently Asked Question

Q1. How much area is required to install 1000-watt solar panels?

Usually, you need a 100 sq. ft area to install it but due to the increase in high-efficiency solar panels (solar PV modules), the required size is reduced to 80 to 100 sq. ft.

Q2. Does any government approval require from the local power discom?

If you install an on-grid solar system, you will need approval from discom for the net metering process whereas it’s not required if you install an off-grid solar system.

Q3. Is solar available on loan, if yes? How?

Yes, it’s available, you must reach out to Loom Solar's sales advisor to guide you on the same.

Q4. How much savings on money on solar panels?

If you install a 3-kw solar system you can save approx. Rs. 3,000 monthly.

Q5. What is the price of battery-powered and grid-connected solar systems?

So, battery power will cost approx. Rs. 1,00,000/- per kw whereas the on-grid system will cost Rs. 60,000/- per kw with installations.

Q6. How much power (kWh) a solar panel will generate City?

It generates an average of 4 to 5 units on a per kw per day basis.

Q7. Does the government provide any subsidy on the home solar system?

Yes, the subsidy is available on rooftop solar installation for residential homes only.

How to find the best Solar Panel Dealers, Distributors, or Installers in Talegaon Dhamdhere, Maharashtra?